Luke Stoltman pressing a heavy wooden strongman log overhead in a purple-lit Giants Live arena

What Lifters Can Learn From Luke Stoltman About Building Overhead Strength That Transfers

UPLIFT IRON CLUB

Luke Stoltman's Log Press Shows Why Overhead Strength Is a Skill

Luke Stoltman pressing a large wooden Rogue log overhead at a World’s Strongest Man event

Luke Stoltman is not famous for building the prettiest shoulder pump. He is famous for sending massive, awkward objects over his head when the object would be perfectly happy to stay on the floor. The Scottish strongman known as the Highland Oak won Europe's Strongest Man in 2021 and again in 2024, then added his first Britain's Strongest Man title in 2025. He has reached six World's Strongest Man finals. The consistency matters, but the fascinating part for ordinary lifters is how much of his edge comes from one specialized quality: overhead strength that works outside the tidy groove of a gym machine.

Stoltman has lifted a 221kg log in competition. It was a British record, not the current one: Jack Osborn raised the national mark to 222kg in October 2025. Nobody needs to approach those numbers to benefit from studying the skill. In fact, a lifter who raises a 40kg press to 50kg through better positions has probably learned the more useful lesson than somebody who simply copied an elite athlete's accessory list.

Picture two people with identical strict barbell presses. One can balance a log comfortably on the upper chest, keep a tight torso, dip vertically, launch the weight with the legs and finish with stable elbows. The other gets the log too low, rolls it forward, loses balance and wastes most of the drive. The first will often outperform the second on the strongman task without having magically larger deltoids. The weight on the implement reflects strength plus skill plus efficient force transfer.

That does not mean technique replaces muscle. Stoltman's presses still depend on exceptionally strong shoulders, triceps, legs, upper back and trunk. The relationship is complementary. More muscle provides a bigger engine; practice teaches that engine to turn in the correct direction. A strict press measures one slice of the engine. A push press adds speed and timing. A log press also demands an efficient clean, a dependable rack and control over a cylinder that wants to roll away.

The practical starting point is to define which overhead result you actually want. Bigger delts? Prioritize progressive shoulder volume. A stronger standing strict press? Practice that lift frequently and recoverably. A bigger log or axle? Practice the implement itself, not just generic pressing. Better athletic transfer? Add leg drive, trunk stiffness and carefully chosen carries without treating every gym session as a strongman final.

A useful assessment is to film three moderate sets from the side: a strict barbell press, a push press and a light log press if you have access. Watch for the point where the load drifts away from the center of the body, the ribs flare or the rep slows. The earliest obvious leak is your first programming target. Stoltman's career makes overhead strength spectacular; your progress usually begins with making an ordinary rep cleaner.

Learn the Log Lap and Clean Before Trying to Press Heavier

Strongman athlete in a red top bringing a large black log toward his chest during the clean

The most important overhead improvement may happen before the weight is actually overhead. Strongman logs start on the ground. Their thick, round bodies and recessed neutral handles make them fundamentally different from a straight bar. To press one well, you first have to bring it into a reliable rack position. That sequence has three recognizable moments: lift the log to the thighs, settle it into the lap, then roll and drive it into the upper chest. Trying to skip the middle often turns an efficient full-body movement into a frantic arm curl.

Start with the empty implement. Its unloaded weight may already be challenging, so check the specification rather than assuming it weighs the same as a 20kg Olympic bar. Stand close, use the internal handles, hinge with a braced torso and lift the cylinder toward your thighs. Bend the knees to sit it high into the lap, keeping the log close. Your arms should act more like straps and guides than as the primary engine. Think legs lift; hips and upper back reposition; arms steer.

From a stable lap, direct your elbows around the log and bring your chest toward it. Drive through the feet while extending the hips, keeping the implement rolling close rather than letting it arc away. The goal is a reproducible shelf across the upper chest and shoulders. A clean that leaves the log down by the stomach usually makes the next part dramatically harder. Keep the torso firm and get enough air before the explosive effort; how much adjustment is possible depends on the event clock and the athlete's experience.

For most recreational lifters, separate the skill from the test. Do three to five sets of two or three light cleans, placing the log back down under control after each rep. Rest enough to perform every attempt deliberately. You can also practice a lap-to-rack clean starting with the log on safety pads, provided the implement and supports are suitable. Have an experienced coach supervise unfamiliar heavy logs and clear people and obstacles from the landing zone.

Two common mistakes deserve special attention. First, lifters sometimes use the lower back to violently heave the implement from a poor lap position. Fix the position and reduce the weight rather than asking the spine to solve a geometry problem. Second, they rush into the press while the log is still moving. The hands, wrists, elbows, trunk and feet need to agree on where the weight is before you launch it again. A rushed transition might succeed at a trivial weight and fail spectacularly when loaded.

If you do not own a log, you can still practice the general principles with a sandbag to chest, a controlled clean with appropriate equipment and front-rack holds. These are not direct substitutes—the gripping surfaces and center of mass differ—but they can teach tight-object handling and bracing. When a real log becomes available, begin light and rebuild the technique from the ground up. The transferable lesson is not that every athlete needs a strongman implement; it is that how you deliver the load into the pressing position changes how much force you can use.

Turn Leg Drive Into a Stronger, More Stable Push Press

Strongman athlete pressing a massive wooden log to full overhead lockout inside a gym

Once the load reaches the shoulders, the next question is not simply whether your arms are strong enough. It is whether your entire body can accelerate the implement in a coordinated sequence. A push press starts with a small dip, a forceful leg drive and a press that finishes the movement. Stoltman has described using heavy push presses early in a pressing session before moving to stricter shoulder work. That ordering makes sense when the goal is to build an explosive, high-force overhead skill while fresh.

Keep the dip short enough that you remain balanced over the middle of the feet. Let the knees bend without turning the movement into a forward-leaning squat. Brace the abdomen and keep the chest stacked rather than allowing the ribs to flare dramatically. Then drive hard through the legs. As the body rises, transfer that upward impulse into the bar or log and finish with the arms. The sequence should feel like one powerful launch followed by a clean lockout, not a half-squat followed by an unrelated shoulder press.

The timing matters. Press too early and the shoulders fight the weight before the legs finish accelerating it. Wait too long and the load loses the momentum that the legs created. A practical drill is to compare a moderate weight for three strict reps against three crisp push-press singles, focusing on a vertical dip and fast extension. The point is not to cheat the strict press. The push press is a different lift, and leg involvement is the entire point.

Logs add another complication: their girth often forces a slight backward head position at the start so the cylinder can pass the face. That is not permission to overextend the lower back or turn the press into a dangerous standing bench. Keep the ribs and pelvis controlled, give the load a clear path and move the head through once there is room. At the top, aim for a balanced position with the implement over a stable support base. Exact technique will vary by equipment, grip and mobility.

A useful barbell exercise is four sets of three push presses at a load that moves rapidly with no ugly grind. Two to three minutes between sets is usually more valuable than chasing an exhausted shoulder burn. Add a pause in the rack between reps to reset your brace and make the next dip identical. If the torso begins to tilt or your heels jump erratically, the load may be too ambitious for skill development that day. Video from the side can expose a forward drift you will not notice while lifting.

Do not confuse a push press with a push jerk. In a jerk, the athlete drives and then bends the knees again to receive the load, allowing more weight to be supported with less pure arm pressing. Both can be valuable, but they develop different coordination demands. Whether a strongman event permits a technique depends on the rules and implement. For the ordinary lifter, improving the push press teaches a simple principle that transfers to many athletic tasks: force is useful only when the joints, torso and timing transmit it in the same direction.

Strict Pressing Builds the Shoulder Strength Beneath the Explosive Lift

Strength athlete in a blue shirt holding a loaded barbell overhead inside a gym

A spectacular push press can disguise a mediocre strict press for a while, because the legs supply much of the initial acceleration. But eventually the arms must finish and control the load. That is why strong overhead athletes usually develop a base of pressing strength without leg assistance. Stoltman has explained that he follows heavy push presses with stricter overhead pressing to build raw shoulder power. The lesson is not to copy his kilograms or even his exact order every week. It is to keep a deliberate separation between explosive skill work and the muscular capacity that supports it.

In a strict standing press, the knees stay extended and there is no deliberate leg dip. Set the feet securely, brace the torso, begin with the hands and elbows in a practical stacked position, move the head just enough to clear the bar, and finish with the load balanced above the trunk. An athlete can lean back slightly without losing control, but turning a strict press into a dramatic backbend changes the task and can make progress difficult to compare. Consistent standards matter more than collecting flattering personal records.

A sensible main lift for an intermediate trainee is three or four sets of four to six strict presses, stopping with approximately two clean reps available on the early sets. Add a little weight only when you can complete the upper end of the rep range without shortening the range, changing foot position or forcing the lower back into a new angle. If your goal is maximal strength, some lower-rep practice can help, but repeated grinding at your limit is a poor replacement for sustained quality work.

Variation helps when it addresses a specific constraint. A seated dumbbell press can build shoulder and triceps strength while lowering some whole-body demands; the two dumbbells also let the arms find slightly different tracks. A neutral-grip landmine press can be useful for lifters who cannot yet reach a comfortable vertical overhead position, but it is not identical to an overhead lockout. A one-arm dumbbell press challenges lateral trunk stability. A high-incline press trains a related angle without perfectly reproducing a standing strict press.

Be careful with the phrase 'shoulder-friendly.' A lift being comfortable for one athlete does not make it universally protective. Range of motion, training history, symptoms and load management all matter. If an overhead movement causes sharp pain, do not try to imitate a professional strongman's determination. Stop, choose a tolerable alternative and seek appropriate clinical advice if symptoms persist. Likewise, don't assume bigger front delts alone will fix unstable overhead positions; upward rotation of the shoulder blades, thoracic movement and upper-back control also matter.

The measurable payoff is simple. Track the same strict-press technique for four weeks, alongside your push press. If strict strength rises while the push press stalls, investigate dip timing or the rack position. If both stagnate, review total fatigue, pressing volume and recovery. Using two different tests separates a strength ceiling from a skill bottleneck. That is more informative than blaming 'weak shoulders' for every missed overhead rep.

The Upper Back, Triceps and Trunk Make the Press Reliable

Muscular man performing a cable rope face pull with elbows raised to train the upper back

When you watch an elite log press, the giant shoulders demand attention. What is less obvious is the supporting cast doing enough work to keep those shoulders useful. The triceps must finish the elbow extension, the upper back helps organize the rack and overhead position, and the trunk resists the weight pulling everything out of alignment. The legs supply the initial force in a push press, but they cannot compensate for every weakness higher up the chain.

Stoltman's reported press-day accessories have included dumbbell bench presses, face pulls and triceps press-downs after heavier pressing. That combination is less exotic than a competition log. It offers a useful template: move the specific heavy task first, then train the tissues that must keep performing it over months and years. Accessories are not decorative punishment at the end of a workout. Their value comes from filling an identifiable gap without wrecking the next primary session.

For the upper back, use chest-supported rows or cable rows to reinforce pulling strength without always loading an already-tired spinal erector. Add face pulls or reverse flyes for controlled shoulder and scapular movement. Instead of throwing heavy weights around, aim for smooth sets of ten to twenty repetitions and a repeatable end position. Feeling the right muscles work is useful, but the larger test is whether the exercise lets you accumulate enough productive work without elbow or shoulder irritation.

For triceps, choose one press extension that feels comfortable: rope press-downs, a controlled cable overhead extension or an appropriately loaded close-grip press. Two to four sets in roughly the eight-to-fifteen-rep range are plenty for many trainees when combined with their compound pressing. Do not mistake joint discomfort for evidence of an effective set. If the elbow angle of one movement aggravates symptoms, experiment with another attachment or range rather than forcing the exact variation used by a professional.

The torso deserves equally deliberate attention. Farmer carries, front-rack carries, suitcase carries and controlled dead bugs each challenge bracing differently. A carry is especially interesting for strongman transfer because the athlete has to maintain posture while the weight tries to move. Start with manageable weights, short walks and deliberate turns. Walking far with a collapsed trunk may create exhaustion, but it teaches a less useful version of the skill.

There is also a quiet recovery lesson here. More accessory volume is not always better. If you press heavily twice a week, adding ten sets of lateral raises, ten sets of overhead extensions and several demanding bench variations may raise soreness and reduce your ability to practice the lift that actually matters. Start with a small, purposeful menu, then increase only when performance and recovery justify it.

One sensible assistance circuit after the primary press is three sets of chest-supported rows, two or three sets of face pulls, two or three sets of press-downs and two controlled carries. Keep most sets one to three repetitions shy of ugly form. That is enough to address multiple weak links without pretending your shoulders need a bodybuilding marathon every time you want a stronger log.

Strongman Pressing Must Work With Fatigue and Different Implements

Strongman athlete pressing a large wooden Rogue log overhead during an outdoor overhead medley

Being able to press a weight once under ideal conditions is not the same as being ready for a strongman event. Competition might require a heavy log for maximum weight, a series of implements of increasing difficulty, a Viking press for repetitions or an awkward circus dumbbell with only one arm. The difference is not a minor change in the handle. Each implement changes the clean, rack, grip, line of force, balance demands and how quickly you can reset between efforts.

Stoltman's competition history illustrates the point. His best log, axle and dumbbell performances are different tests, even though all three end with something overhead. A heavy axle or a thick circus dumbbell can expose problems that never appear on a standard barbell. In a timed medley, an athlete also pays for every clumsy transition and unnecessary breath. An overhead specialist has to combine power, efficiency and enough fitness to repeat efforts while the clock is running.

Consider the difference between a maximum single and six quality repetitions. In the single, you can spend time arranging the stance and taking a complete breath. In a repetition event, a slow reset can be costly, but rushing into a crooked rack is costly too. The skill is to create a fast, repeatable setup that does not collapse when breathing becomes difficult. A lifter who is strong for one rep may lose several positions after the third or fourth because the trunk and upper back cannot recover quickly enough.

You can train that without turning every set into chaos. After your main strength work, choose a manageable implement and perform three short rounds of controlled repetitions with generous recovery. For example, practice three technically identical push presses with a moderately challenging barbell, then rest two minutes. On a separate day, perform a light carry and repeat after full breathing recovery. These are skill exposures, not tests of how close you can come to fainting.

If you have access to multiple overhead implements, rotate them carefully: log on one week, axle or barbell on another, and a dumbbell when you can handle it safely. Do not introduce a new technical event at near-maximal weight. Let movement quality establish the loading. If you lack strongman equipment, a barbell push press plus dumbbell work provides useful general preparation, but it will not automatically make you competent at cleaning an enormous cylinder.

Recovery also becomes specific. Hard overhead work burdens the triceps, delts and upper back; heavy carries and deadlifts may leave the trunk fatigued before the next press. A training week that looks reasonable exercise by exercise can still be unreasonable as a whole. Put the most technical and heaviest press early in a fresh session. Keep hard carries away from important max-effort days when possible, and consider dropping accessory volume during a week with demanding competition-style intervals.

The biggest lesson is that strongman strength is strength expressed under constraints. You need enough raw power to move the load, enough technique to avoid wasting it and enough conditioning to reproduce that technique as fatigue rises. Decide which constraint is failing before adding another generic shoulder exercise.

Try This Four-Week Plan to Build Overhead Strength That Transfers

Strength athlete holding a black strongman log overhead in a training gym

Most recreational lifters do not need a full professional strongman schedule. They need a manageable way to train the quality they care about twice per week, practice technique before fatigue and keep enough energy to make progress elsewhere. The following four-week block translates the principles above into a practical experiment. It is not Luke Stoltman's personal program; it is an accessible strength-first plan inspired by the separation between explosive pressing, strict strength and assistance work.

Use two pressing sessions with at least two days between them. Keep a logbook that records the implement, weight, repetitions, effort and one technical note. If you are new to overhead lifting, begin even lighter and spend the first week learning the positions. If you have pain, unresolved injury or medical restrictions, choose appropriate substitutions and obtain individualized guidance instead of following the numbers mechanically.

Day A — force and skill: Warm up with several progressively heavier sets of your primary press. Perform a push press for four sets of three at a load that remains fast and tidy, approximately two to three reps away from a serious miss. If you own a log and have practiced its clean, add three sets of two light lap-to-rack cleans before the press rather than after fatigue has built. Follow with three sets of five strict presses at a manageable weight, then three chest-supported rows of eight to twelve reps. Finish with two sets of face pulls of twelve to twenty reps.

Day B — strict strength and support: Use the strict standing press for four sets of four to six. Leave one to three good reps in reserve and keep the same technique from set to set. Then perform a one-arm dumbbell press for three sets of six to ten per side, two or three sets of comfortable triceps extensions for ten to fifteen reps and two farmer carries of twenty to thirty meters. The carries should make your torso work without turning the final steps into uncontrolled leaning.

Week 1 — establish the reference: Choose conservative loads and write down what the clean, dip, drive and overhead finish actually look like. No maximal testing is necessary. Record a side-view video of the first and final working sets. Decide whether your most obvious limitation is the rack, the dip path, the press itself or poor stability overhead.

Week 2 — repeat before increasing: Keep the same exercises and try to make every rep look more similar. Add a small increment only where the previous session met the technical standard and did not produce excessive soreness. If the push press is becoming a slow, ugly strict press with a knee bounce, reduce the load and improve timing instead.

Week 3 — modest overload: Add another small load increment or one rep to a supporting exercise while maintaining the stated effort margin. Avoid increasing both volume and intensity across every exercise simultaneously. Keep technical log cleans light enough that you can repeat the same rack position each time. If sleep or recovery has been poor, hold the weights steady.

Week 4 — show the improvement: Trim the accessory work by roughly a third, keep a few crisp practice sets and compare a controlled three-repetition push press with the beginning of the block. Repeat your strict-press rep test with the same form standards and weigh the result against the video. Better stability, a faster bar and one extra clean rep may signal genuine progress even without a dramatic new personal record.

At the end, ask three questions: Can I reach the rack consistently? Can I drive the weight upward without leaking balance? Can I finish the press with my trunk and elbows under control? Those answers tell you whether the next block should emphasize technique, strict strength, triceps capacity or recovery. The entire idea is to build strength that survives outside one perfect gym rep—and to progress without needing a Highland Oak-sized implement.

Strongman Shirts and Strength Gear collection
Strongman Shirts & Strength Gear

Strongman gym shirts and strength gear for lifters who train stones, carries, presses and brutally heavy objects.

EXPLORE COLLECTION

More Strongman stories

Terug naar blog

Reactie plaatsen