Myles Garrett training shirtless with visible muscular shoulders and arms while handling a football at Cleveland Browns camp

Why Myles Garrett’s Shoulders and Arms Stand Out Even Among NFL Players

UPLIFT IRON CLUB

The Size Is Real, but the Job Explains the Shape

Myles Garrett standing shirtless in a gym with visibly developed shoulders, chest and arms

There is big by gym standards, and then there is Myles Garrett standing beside other NFL players and somehow looking like he wandered into the wrong sport. He is listed at 6 feet 4 inches and 272 pounds, yet the striking detail is not simply his overall mass. It is the breadth of his upper body, the roundness of the shoulders, the thickness around his upper arms and the way his torso appears built to absorb contact. When even the people around you are professional football players, standing out takes something unusual.

The first piece of the explanation is obvious and impossible to copy exactly: frame, natural structure and individual response to training. Shoulder width is influenced by skeletal proportions, including clavicle length. The apparent size of an arm depends on triceps, biceps, brachialis, forearm musculature, body fat and the proportions of the surrounding torso. Two people can add the same amount of muscle and create very different silhouettes. A large shoulder complex on a relatively lean, athletic frame looks especially dramatic.

The second piece is training history. Garrett was already a rare physical prospect before professional football. He did not build his shoulders in a six-week camera-ready transformation. Years of structured lifting, field work, contact preparation and recovery have allowed him to accumulate and retain muscle while learning how to use it. Professional resources matter, too: a coaching team can adjust training around changing demands and monitor how an athlete tolerates work. That support is not a magic shortcut, but it makes consistent high-quality training easier.

His appearance also has a positional explanation. An edge rusher repeatedly collides with people who may outweigh him, tries to create space with one or both arms, and then has to accelerate or turn toward the quarterback. Wide shoulders help create a formidable visual silhouette, but a thick upper back, powerful pressing muscles and coordinated hands are useful because they support the work of fighting off blocks. This is one reason a defensive end can have a more developed upper body than an endurance-position athlete of similar height.

Garrett's career provides a reminder that the gym result is attached to a skill result. He set an NFL single-season record with 23 sacks in 2025 while playing for Cleveland, before joining the Los Angeles Rams in 2026. The record does not prove any single exercise built his physique, and a spectacular physique does not guarantee 23 sacks. It does show why his physical development should be understood in the context of years spent solving a demanding sporting problem.

It is also worth resisting two tempting shortcuts. The first is to assume his entire build came from the bench press. Heavy pressing is a useful contributor, but an arm-dominant collision sport draws on far more than one lift. The second is to infer drug use or make claims about personal habits from a photograph. Images establish what an athlete looks like at a particular moment; they cannot reliably establish physiology, training history or medical information.

For ordinary lifters, the productive question is not whether they can reproduce an NFL superstar's exact dimensions. It is which trainable features explain the look. Bigger deltoids build shoulder caps; developed triceps add much of the upper arm's visible mass; lats and upper-back muscles create width from behind; strength through the trunk allows those parts to operate together. Training those qualities for months and years, while remaining sufficiently lean to see them, offers a realistic version of the principle without pretending everyone has the same frame.

That distinction changes expectations. A beginner can transform their shoulder and arm development with sensible progressive overload. An intermediate lifter may need more precise weekly volume and better exercise selection. Neither should expect a professional edge rusher's body after a viral workout circuit. The remarkable part of Garrett's appearance is not one secret exercise; it is how much strength, musculature and athletic function fit in the same body.

Why Edge Rushers Need More Than Big Delts

Myles Garrett in a Browns uniform accelerating toward an opposing offensive lineman during a game

A pass rush is not a shoulder exercise with a helmet on. The defender has to read the offensive lineman's stance, time the first steps, generate acceleration, make contact and redirect an opponent who is trying to control both his path and his arms. Some attempts finish with a long-arm move; others involve a rip, swipe, club or bend around the outside shoulder. The upper body is only one part of the task, but it is the part that visibly meets resistance.

Consider what happens when a defensive end drives an arm into a blocker's chest. The shoulder and chest contribute to pushing, the elbow extends through the triceps, and the upper back stabilizes the shoulder blade. Force reaches that arm from the ground through the legs and torso. If the athlete's feet slip, hips are in the wrong position or trunk collapses, enormous arms cannot rescue an ineffective angle. That is the distinction between isolated muscle strength and usable force in a moving contest.

The deltoid has three commonly described regions. Its front portion assists pressing and raising the arm in front of the body; the middle contributes to moving the arm outward; the rear portion supports movements involving the upper arm moving backward and control around the shoulder. Pressing, rowing, carrying and targeted raises challenge overlapping pieces of that system. The rotator cuff and muscles that move the shoulder blade provide control behind the scenes. Looking like you have boulders for shoulders is one thing; moving them through a violent, changing environment is another.

A well-developed upper back is especially important to the complete picture. The lats, traps, rhomboids and other scapular muscles affect how the shoulder sits and moves, while also giving the torso the thickness that makes arms appear proportionally powerful. On a football field, a stable upper back helps a defender maintain or change arm position against resistance. In the gym, it supports presses and lets the lifter accumulate upper-body work without turning every workout into a push-only contest.

Garrett's 2024 training interviews emphasized one-arm force and body control for a reason. An offensive lineman may grab, twist or push from an angle; the defender cannot demand symmetrical loading. A one-arm press, a heavy row, a controlled suitcase carry or an offset-loaded split squat can train useful capacities under different degrees of asymmetry. They are not perfect replicas of football contact, and a lifter does not need to pretend they are. They are ways to practice producing and controlling force when the load is not perfectly centered.

For the average gym-goer seeking bigger shoulders, the lesson is to combine exercises rather than chase endless lateral raises. Use one substantial horizontal or diagonal press, one substantial row or pull, a controlled overhead or landmine variation, and direct lateral and rear-delt work. Shoulder size will respond to appropriate mechanical tension and recoverable volume; athletic competence depends on applying those strengths in multiple contexts. There is overlap, not identity.

An easy self-check is to compare three forms of strength: can you press a weight smoothly, can you hold your trunk steady while pressing with one arm, and can you row or carry without losing shoulder position? If only one answer is yes, your upper-body development may be more specialized than you think. The goal is not to become an NFL defender, but to avoid becoming a person who looks strong from the front and falls apart whenever an exercise gets slightly awkward.

The most useful NFL takeaway is that arms are not decorations mounted on the shoulders. They are the ends of a chain beginning at the feet. Building them larger is absolutely worthwhile if that is the goal. Training the chain that supports them is what turns the size into a more versatile kind of strength.

The Single-Arm Landmine Press: Power With a Purpose

Myles Garrett in a half-kneeling stance pressing the free end of an angled barbell with one arm in a gym

One of the most revealing details from Garrett's public training discussions is the single-arm landmine press. It looks simple: anchor one end of a barbell, hold the free end in one hand and press it upward and forward. The simplicity is the point. The athlete has to generate force with one arm while resisting the temptation to twist the torso or lean away from the load. That gives the exercise a different job from simply adding kilograms to a conventional bench press.

The bar travels along an arc rather than straight overhead. That diagonal pressing path recruits the front deltoid, upper chest, triceps and shoulder-blade stabilizers while placing a meaningful demand on trunk control. Half-kneeling makes compensations more obvious because the legs provide less opportunity to cheat. Standing permits more total-body contribution, and a split stance can give an athlete room to organize the hips and ribs while pushing hard.

The connection to an edge rusher is understandable. An opponent does not supply two matching dumbbells in a perfectly balanced position. The defender often needs one arm to extend forcefully while the torso stays connected to the legs. Garrett has discussed why the reach of a single extended arm matters to moving an offensive lineman. In the weight room, a landmine press can strengthen the pressing pattern and teach control; on the field, timing and contact skill determine whether that strength creates an opening.

You do not need to load the bar like an elite defensive player. In fact, a lighter, cleaner press will often teach the intended skill better than a desperate maximum. Set up with the bar end in front of one shoulder. If half-kneeling, place one knee down and the opposite foot forward, maintain a tall torso, brace the abdomen and squeeze the down-side glute lightly. Press up and forward without letting the ribs flare or torso spin. Finish with the arm extended, allow the shoulder blade to move naturally and return under control.

The muscles can be trained with several useful loading styles. For basic size and technique, perform 3 sets of 8–12 smooth repetitions per side, resting about 60–120 seconds. For strength, use 3–4 sets of 5–8 repetitions with more rest while avoiding grinding. For power, use a lighter implement for 3–5 sets of 3–5 fast repetitions, stopping each set before speed visibly drops. Those are different intentions: a heavy slow press and a fast crisp press should not be blended into the same exhausting set.

Some shoulders tolerate the landmine's forward arc better than straight-up overhead work, but comfort is individual. A secure anchor is essential; a bar that can slide or tip is not an acceptable substitute. Anyone with existing shoulder pain should pick a pain-free variation or seek qualified assessment instead of pushing through discomfort because an NFL star does the movement. A machine press, cable press or neutral-grip dumbbell press can be a reasonable alternative.

The exercise also reveals the limit of comparing lifts online. A landmine's resistance changes through the arc, the bar's own weight distribution matters and different attachments alter grip position. Counting plates alone is not a reliable measure of who is stronger. A better comparison is your own range of motion, control, load and speed with the same setup over time.

For an accessible superset, pair the landmine press with a chest-supported row. Complete one press set per arm, rest, perform a controlled row set, then repeat. This builds pushing and pulling capacity in the same session without treating the upper back as an optional accessory. Add lateral raises later if the goal is more visible shoulder width. The landmine trains a useful press; the rest of the program builds the broader physique.

Arms Under Contact: Triceps, Back, Grip, and Hand-Fighting

Myles Garrett in a white Cleveland Browns uniform engaging an opposing player with his arms during a football game

A football defensive end's arms have two visible jobs: reach the opponent and control the contest once contact happens. But the impressive shape of Garrett's arms is not explained by biceps curls alone. The triceps occupy a large portion of the upper arm's mass, and pushing force requires them to extend the elbow. Biceps, brachialis and forearms help with flexion, grip and positional control. Meanwhile, the upper back and chest provide the muscular base that supports the arms as they change direction.

Picture a defender pressing against a blocker. The shoulder and chest help drive the arm forward, the triceps straighten the elbow, and the trunk prevents the body from being folded backward. Now picture the defender pulling an arm free or turning around the block. The elbows flex, the shoulder retracts or extends and the hips must rotate at the right time. The movement patterns change from moment to moment. That is why training only one direction leaves an obvious gap.

Garrett has displayed extraordinary conventional strength in public workout footage, including heavy bench-press sets. Those clips establish that he has spent serious time building force, not that every lifter should chase his numbers. Loads filmed for social media can differ in setup, range and context. They also tell us little about the less glamorous work that makes heavy training sustainable: rowing, scapular control, warm-ups, progressive training blocks and adequate recovery.

His strength coach has described a progression that makes more sense than treating every offseason session like a maximum-lift challenge. Early phases rebuild structural support; heavier work develops force capacity; subsequent phases prioritize speed, change of direction and efficient repeated effort. For a field athlete, increasing a huge squat or bench by another few pounds may produce less benefit than learning to use existing strength faster and in less predictable positions. Recreational lifters can borrow the sequencing without borrowing the professional workload.

If your aim is visibly bigger arms, training should still be specific enough to stimulate growth. Use a compound press for substantial triceps loading and a row or pull-up for elbow-flexor and upper-back work. Add direct elbow extension and curl variations because compound lifts do not always provide enough targeted stimulus for every muscle. Favor full, controlled ranges that your joints tolerate. A long-head triceps movement overhead or on a cable, a neutral-grip curl and a supinated curl can complement the big lifts without swallowing the whole workout.

Grip should not be neglected, but it also should not dominate every pulling session. Farmer carries and timed hangs are simple tools for forearm and hand strength. A controlled suitcase carry adds an anti-side-bending trunk demand. Keep grip work at the end of the session when possible so fatigued hands do not limit the quality of heavier rows and hinges. If straps help you train your back adequately, they are a tool, not a moral failure. Dedicated grip work can live elsewhere.

One practical arm session could include three sets of 6–10 close-grip push-ups or pressing repetitions, three sets of 8–12 chest-supported rows, two or three sets of 10–15 cable triceps extensions and two or three sets of 8–12 curls, followed by two controlled carries. That is plenty of useful work when added to a sensible weekly plan. If the elbows begin to feel irritated, modify grip, load or range rather than insisting on the same barbell position through pain.

For Garrett, the real value of arms this powerful is not the sleeve-filling visual. It is the ability to reach, resist, pull, push and rapidly re-engage against other elite athletes. A gym-goer can build impressive upper arms with simpler tools, but should remember that well-rounded strength requires the shoulders, back, trunk and hands to cooperate.

The Hidden Engine: Trunk, Hips, Mobility, and Conditioning

Myles Garrett standing inside the Cleveland Browns training facility holding a round weight plate overhead

Garrett's shoulders receive the attention because they are impossible to miss. His trunk and hips do much of the less visible work that makes them useful. When an edge rusher plants a foot and fights through contact, force must travel through the pelvis and torso before it reaches the shoulder and hand. If the middle of the body folds, twists uncontrollably or loses position under an uneven load, some of that force is wasted. Massive arms attached to an unstable base are not a complete power system.

Garrett's performance coach has described specific work to improve lumbopelvic stiffness and force transfer. That does not mean trying to keep the spine motionless during every athletic action. It means being able to resist unwanted movement when necessary and then move deliberately when the play demands it. Offset loading, pauses and tempo work can challenge those qualities with far less absolute weight than an all-out barbell lift.

One example is a plank kettlebell drag. From a stable push-up position, move a manageable bell from one side of the body to the other while minimizing unnecessary hip rotation. The exercise looks small beside a crushing bench press, but that is precisely why it is useful: it exposes how the trunk responds when one arm leaves the ground to pull a load. A related option is the suitcase carry, where one hand holds a weight and the body resists leaning toward it.

Garrett has also spoken publicly about Pilates, yoga and mixed martial arts as ways to expose his body to different movement demands. That is not evidence that any single modality prevents injuries; injury risk depends on numerous factors, including exposure, training load, technique and chance. It does show a high-level power athlete taking flexibility, coordinated control and movement variety seriously. The lesson is not to copy an entire recovery routine from a celebrity interview, but to recognize that rigid strength and controlled mobility can coexist.

For a lifter who spends most training time at a rack, this suggests a small but useful addition: two sets of controlled thoracic rotations, comfortable shoulder flexion work and hip mobility before difficult sessions. Add two or three short sets of anti-rotation core training each week. Start with quality rather than fatigue. If you cannot maintain a steady pelvis during a simple unilateral movement, increasing the load is rarely the smartest first adjustment.

Conditioning is another overlooked part of the picture. Football demands short bursts repeated with imperfect recovery, not merely one extraordinary effort. Garrett's coaching team has emphasized finishing a session with the ability to produce serious work even under accumulating fatigue. For an ordinary person, that could mean two weekly bouts of low-impact cycling, incline walking or easy aerobic work, plus occasional short efforts if joints and fitness allow. It need not become a punishment circuit that steals recovery from strength training.

The training order matters. A day of maximal sprints, hard lifting and exhaustive intervals piled together creates a lot of fatigue and little room for high-quality movement. Keep fast or technically demanding drills early in a session when fresh. Place easier aerobic work where it does not disrupt heavy lower-body training. A person who is sore all week is not automatically building better athleticism; they may simply be collecting fatigue.

Finally, remember that an impressive physique does not make an athlete immune to injury. Garrett has had real physical setbacks over his career despite his training resources and strength. Functional fitness is not invincibility. The realistic prize is a body that can keep lifting, moving and recovering over years, rather than a dramatic one-week demonstration that compromises the next month.

An Eight-Week Plan for Bigger, More Athletic Shoulders and Arms

Myles Garrett bench-pressing a heavily loaded barbell with a spotter in a gym

You do not need five coached training mornings, an NFL practice field or a professional medical team to borrow the useful ideas. The accessible formula is progressive pressing and pulling, direct shoulder and arm volume, some unilateral and trunk work, and enough conditioning to move well. The following eight-week template is an original recreational plan inspired by those principles, not Garrett's private training program. It assumes an adult who already knows basic gym technique and has no injury that prevents the listed movements.

Day 1 — Upper-body strength. Perform a barbell or dumbbell bench press for 3 sets of 5–8 reps, a chest-supported row for 3 sets of 6–10, a half-kneeling single-arm landmine press for 3 sets of 8–10 per side, and controlled lateral raises for 3 sets of 12–20. Finish with triceps cable extensions for 2 sets of 10–15. Rest roughly two to three minutes on heavy compound sets and about one minute on smaller movements. Keep one or two good repetitions in reserve rather than failing every set.

Day 2 — Easy movement and trunk control. Walk briskly, cycle or use another low-impact modality for 20–35 minutes at a conversational effort. Add two rounds of 8 slow kettlebell plank drags per side or 20–30 seconds of a Pallof hold per side, followed by comfortable shoulder and hip mobility. This day is designed to leave you fresher, not exhausted. People who already perform demanding sports may need only the mobility and trunk work.

Day 3 — Pulling and arm development. Perform a pull-up or pulldown for 3 sets of 6–10, a one-arm cable row for 3 sets of 8–12 per side, a neutral-grip curl for 3 sets of 8–12, and an overhead triceps extension for 3 sets of 10–15. Add rear-delt cable flyes for 3 sets of 12–20 and two sets of farmer carries covering a manageable distance. Make the last rep challenging without turning the body into a swinging counterweight.

Day 4 — Rest or light athletic practice. Take the day off if the shoulders, elbows or general energy need it. Otherwise, practice a small amount of low-impact footwork, controlled accelerations or a short cycling session. Speed drills deserve a warm-up and should stop when technique deteriorates. Professional-level contact drills, uncoached tackling and maximal sprint volume are not required to grow impressive arms.

Day 5 — Full-body power and shoulder balance. Begin with 3 sets of 3–5 crisp medicine-ball chest passes or another safe, fast push against modest resistance. Then perform a squat or trap-bar deadlift for 3 sets of 5–8, an incline dumbbell press for 3 sets of 8–12, a neutral-grip pull or row for 3 sets of 8–12, and two sets each of lateral raises and curls. Finish with a suitcase carry for two short trips per side. Legs belong in the plan because a powerful upper body should not sit on an ignored lower body.

Days 6 and 7 — Recovery. One day can contain a comfortable walk, easy cycle or recreational activity. Keep the other genuinely easy. Sleep, adequate protein, overall calorie intake and sensible workload management have more influence on long-term muscle development than finding an obscure extra shoulder finisher. A maintenance-calorie diet is reasonable for those prioritizing strength without changing body weight; a modest surplus may assist muscle gain for some. No magic meal timing makes up for inconsistent training.

Weeks 1–2 establish technique. Use loads that permit clean repetitions, find pain-free pressing angles and note the loads used. Weeks 3–4 add repetitions. When all sets reach the upper end of their range with sound technique, increase load slightly the next time. Week 5 reduces fatigue. Cut accessory sets by about one-third to one-half, keep movements familiar and avoid testing maximums. Weeks 6–8 build again. Restore normal volume, make small load increases and compare technique, rep quality and performance with the opening fortnight.

To judge progress, track more than the tape measure. Record your pressing and rowing loads, a consistent shoulder or upper-arm circumference measurement, and whether unilateral pressing feels more controlled. Photos under similar lighting can help with aesthetics, but they are not a reliable assessment of football ability. If the goal is an athlete-like look, aim for shoulders that grow while your movement quality and conditioning remain at least as good.

The final principle is restraint. Garrett's shoulders and arms stand out because an exceptional athlete has assembled extraordinary size, strength and skill over a long career. Ordinary lifters can improve all three at their own level, but copying a professional player's heaviest training numbers would miss the entire lesson. Build the muscles, build the patterns that connect them, recover, and repeat for enough months that the result becomes visible.

Funny Gym Shirts and Workout Gear collection
Funny Gym Shirts & Workout Gear

Funny gym shirts, tanks, hoodies and workout gear for lifters who like training hard and not taking gym culture too seriously.

EXPLORE COLLECTION

More NFL athlete physique and functional upper-body strength stories

Bloga dön

Yorum yapın