100 Curtis P Reps, 3 Devil Presses Every Minute: The Partner WOD That Punishes Bad Pacing
UPLIFT IRON CLUBShare
The 100-Rep Curtis P Relay: What the Workout Actually Asks You to Do

This is not a conventional set of 100 barbell repetitions. It is a two-person relay with a deliberately inconvenient interruption. The pair must finish 100 Curtis P complexes for time. Every new minute, both athletes complete three devil presses before returning to the shared barbell total. One partner performs a Curtis P, then the other performs one; that back-and-forth continues until the minute changes. Whoever has the bar must respect the next interruption instead of squeezing in one reckless final rep.
One Curtis P combines a power clean, two front-rack lunges and a push press. Put the components together and the total work becomes clearer: 100 cleans, 200 individual lunges and 100 push presses, spread across both athletes. On a perfectly equal split, each partner does 50 cleans, 100 lunges and 50 push presses. The devil presses are additional work. Each athlete completes three at the beginning of each minute, so an eight-minute finish requires 24 devil presses per person; a 12-minute finish requires 36. Those examples are illustrations, not predicted finish times or imposed time caps.
The trick is that the devil press is not a rest station. It taxes the shoulders, trunk and cardiovascular system immediately before the next barbell sequence. The clean needs speed, the lunges need balance, and the press needs overhead control. The workout therefore rewards athletes who can preserve repeatable technique with a steadily rising heart rate, not merely the person who can push one heavy barbell through a single flashy complex.
Before starting, agree on the interpretation of a valid rep. Finish the power clean in a stable front rack. Complete one controlled lunge on each leg, with the appropriate knee and hip position for the agreed standard. Drive the bar overhead and stand tall under control. A sloppy press or a half-depth lunge creates confusion when the pair is tired. Standards should be settled before the first minute rather than argued over while both partners gasp for air.
The clock is a pacing constraint, not just a scoreboard. At the minute change, finish or safely terminate the current movement, put the bar down securely and move to the dumbbells. Resume the relay only after both partners complete the interruption. Count full Curtis P complexes rather than isolated sub-movements so the pair always knows how many genuinely finished repetitions remain. If the workout is performed in a class, agree with the coach on how to score a rep that straddles the minute boundary.
That is why the workout feels tougher than its headline. It keeps asking for a technical clean-and-lunge-and-press sequence immediately after a floor-to-overhead dumbbell drill. The difference between finishing efficiently and surviving badly often comes down to simple decisions made before the first rep: barbell load, dumbbell load, transfer path, breathing pattern and an honest plan for what happens when the devil presses get slow.
For athletes who enjoy hard work that mixes strength and conditioning.
Strength-and-endurance style for lifters, runners and hybrid athletes.
SHOP NOWBuild a Curtis P That Still Looks Clean at Rep 80

The clean is the gateway to every Curtis P, but it should not become an exhausting maximal lift. Start with the bar over the midfoot, brace before pulling, and keep it close as the legs and hips extend. Receive it in a stable partial squat with elbows rotating forward into the rack. The aim is a reliable power clean that leaves enough control for two lunges and a press. If every clean requires a desperate starfish catch, the chosen weight is too ambitious for 100 complexes.
From the front rack, step into a lunge while keeping the rib cage stacked over the pelvis. Avoid letting the bar drag the elbows down or the torso fold forward. A long, unstable step increases the recovery cost on the way back to standing; a cramped step may force awkward knee movement. Make the first lunge deliberate, stand completely, then repeat on the other leg. Both legs receive work before the pressing phase. A front-rack lunge tests more than quadriceps strength because the trunk and upper back must keep the bar in position.
The push press is the last movement, not an excuse to launch the bar with an uncontrolled backbend. Take a shallow, vertical dip through the knees and hips. Drive upward, then finish the press by extending the arms while bringing the head through into a sound overhead position. Keep the whole foot connected to the floor during the dip and drive, rather than tipping aggressively onto the toes. If the athlete has to turn the final reps into awkward grindy presses, it is time to lighten the load or scale the complex.
A smooth reset between sub-movements often saves more energy than trying to chain everything at maximum speed. After the clean, establish the front rack; after each lunge, fully regain balance; before the press, secure the grip and breathe. These tiny pauses are not failures. They prevent the more expensive failures of losing the bar path, repeatedly readjusting foot position or missing an overhead finish. A rhythm that lasts 50 personal complexes is more valuable than a rhythm that looks impressive for five.
Technique checkpoint: If the athlete cannot repeatedly clean the load without jumping forward, perform balanced lunges on both sides and push press with an organized trunk during warm-up, the prescribed load is unsuitable. Try an empty bar, light training bar, dumbbells or another coach-approved variation. A deficit in front-rack mobility can also change the exercise: elbows dropping to the floor is a warning to adapt the rack position, not to force the shoulders through discomfort.
Remember that each complex includes several demands with different limiting factors. The load might feel easy for one power clean while being punishing for the weaker leg or overhead lockout. Choose weight according to the weakest safe link in the sequence. Keep repetitions consistent enough that a partner can recognize the finish immediately. Under this workload, repeatability is a performance skill in its own right.
A little gym humor for every quality rep and sensible barbell decision.
Heartbeat styling for runners, cyclists and conditioning sessions.
SHOP NOWThree Devil Presses Every Minute: Why the Interruption Hurts

A devil press typically moves from a burpee-style descent with hands on dumbbells into an explosive stand and simultaneous floor-to-overhead dumbbell movement. The athlete must control the dumbbells at the floor, stabilize the shoulders through the lowering phase, extend the hips and deliver the weights overhead without resorting to a wild lumbar arch. It takes coordination and breathing control even when performed by itself. Dropping three of them into every minute changes the physiology of the entire partner workout.
The interruption competes with the Curtis P for many of the same resources. It uses the legs to stand, the trunk to transfer force and the shoulders to finish overhead. It also forces an athlete down toward the floor and back up, creating an unmistakable cardiovascular spike. Someone who picks devil press dumbbells solely by asking what they can snatch once is likely to pay for that decision later. The appropriate load is what can be moved safely in repeatable threes while already tired from barbell work.
Notice the timing math. If each partner needs roughly 12 seconds to complete three controlled devil presses, there are about 48 seconds left in that minute for repositioning, barbell transfers and Curtis P work. If those threes drift toward 25 seconds, the productive relay window shrinks to 35 seconds before even accounting for transitions. There is no universal correct devil-press speed here; these examples simply show why transitions become increasingly expensive as the workout progresses.
Choose dumbbells that can be placed safely on the floor and will not force the wrists into an awkward angle. Keep the weights close when moving them between the floor and overhead, and avoid swinging them into the knees or other athletes. Athletes unfamiliar with devil presses can scale to a controlled burpee plus a separate light dumbbell power movement, or to a simpler floor-to-standing sequence approved by the coach. Scaling is especially sensible when the barbell portion already challenges shoulder or back stability.
Breathing strategy matters. Exhale through the demanding stand or overhead drive, then deliberately take a breath before the next repetition. The natural temptation is to sprint the first three devil presses because the stopwatch has just turned over. That often leaves the athlete dizzy or disorganized for the barbell, where missing a rack position costs more time than a measured first few seconds. Repeat the same transition ritual every minute rather than improvising under fatigue.
Keep the movement definition consistent across the team. Whether a local class requires a strict burpee chest-to-floor contact, a specific dumbbell finish or synchronized completion, both athletes should follow the agreed standard. The training objective is repeatable work with transparent scoring. It is not to manufacture an artificially fast result by making the opening minutes strict and the closing minutes vaguely recognizable.
Because every minute feels shorter when your lungs are working overtime.
Pace the Barbell and the Minute, Not Your Ego

There are two clocks to manage. The obvious one is total elapsed time. The less obvious one is the number of good Curtis P complexes you can fit between successive devil-press interruptions. If the pair can regularly finish eight complexes in each working window, 100 takes fewer interruption cycles than if the pair fades to three. But chasing an unrealistic early number can have the opposite effect: missed reps, prolonged breathing stops and a greater total count of devil presses because the workout stretches across more minutes.
Start with a conservative rhythm for the first two or three minutes and use that information to adjust. Count how many complete complexes the team accumulates after each interruption. If the number is stable and both athletes still have room to breathe, gradually increase it. If one athlete looks panicked, the barbell begins crashing forward or the devil presses consume more and more of the minute, simplify immediately. A pace you can reproduce is the foundation for a faster overall finish.
The prescribed alternating sequence helps prevent the stronger partner from monopolizing the bar. One athlete performs a complete Curtis P, then the other. Make the switch as automatic as possible: bar down or safely handed off according to the facility standard, one step back, next person steps in. Do not rush a handoff while the bar is overhead, or leave dumbbells in the walking path. The movement pattern is complicated enough without an equipment traffic jam.
For an illustrative scorecard, imagine the team records 7, 8, 8, 7 and 6 completed Curtis P reps in the first five minutes: 36 total. They are not behind some official pace; the workout has no stated time cap. What matters is whether that pace is sustainable for the remaining 64 reps. A steady seven per minute might beat a reckless 12-rep opening followed by several minutes at two or three. Progress depends on the number of interruptions incurred as much as on isolated barbell speed.
One helpful practice is a brief callout at the end of each minute: the total completed, the next athlete to start, and whether technique remains sound. That takes seconds and prevents arguments over whether a lunge counted. Partners can also agree in advance on a load-reduction point, such as an inability to maintain overhead control. Reducing load safely mid-workout is preferable to repeated no-reps or fighting through pain. The goal is to finish the intended training stimulus, not to prove that today's number has emotional significance.
Give yourself permission to move differently on different parts of the complex. The clean can be crisp; the lunges can be measured; the push press can be firm and technically patient. A smoother cadence is rarely the one that looks fastest in a short clip. On long mixed-modal workouts, the economical athlete repeatedly makes sound decisions and lets the clock take care of itself.
For lifters who know that the lunges eventually collect their payment.
Partner Tactics: Share Work Fairly Without Losing Time

The one-complex-at-a-time format sounds simple until two people have to manage a barbell, two sets of dumbbells, a timer and rising fatigue in the same patch of gym floor. The easiest way to lose free time is to make every transition a negotiation. Decide who begins, where each athlete stands, where the dumbbells live and how the bar is returned to the floor. Position equipment so both people can move without stepping over plates or getting caught under someone else's overhead path.
Use a short, unmistakable verbal system. A partner who finishes a full Curtis P might say “one” and move out. The other answers with the next rep count or simply enters the lift. When the minute changes, both know to stop barbell work and perform their three devil presses. Keep a running team tally on a whiteboard or chalk mark if a long workout makes counting unreliable. An accurate 100 is better than finishing on what someone vaguely thinks might be 100.
Equal rep distribution does not necessarily mean equal perceived effort. One partner may find front-rack lunges harder because of mobility, leg length or prior training, while the other struggles with the overhead phase. If the prescribed version is one-for-one, preserve that structure while choosing a shared barbell load that both can safely handle. When different loads are necessary, ask the coach about using two equipment stations or a modified rep scheme. Do not surprise your partner by altering standards halfway through a competitive attempt.
Support can be practical instead of theatrical. Watch the other person's lunge balance and overhead lockout, call out any obvious danger, and give timely reminders about the next minute. Encouragement is useful, but yelling “faster” at a partner who is visibly losing the front rack is not coaching. A better cue is concrete: “Reset your feet,” “Keep the bar close,” or “Breathe before pressing.” Those observations might save more time than another motivational speech.
Strong partners also decide what to do when the original plan stops working. Perhaps a forearm is cramping, one person cannot bring the bar into a stable rack or the dumbbell transition becomes unsafe. The team should be able to lower weights, take a brief pause or change the movement after agreeing with the coach. Neither teammate should feel forced to ignore pain because the other is chasing an arbitrary finish time. The shared score only matters if the training was completed responsibly.
When the workout is over, the final tally provides a useful benchmark. Record the barbell and dumbbell weights, partner order, completed time, any scaled movements and whether the minute-by-minute output stayed consistent. Without those details, a faster result next month might simply reflect lighter equipment or a different standard. A good partner WOD is both challenging and repeatable enough to teach you something about teamwork and pacing.
For the training partners who count every rep and keep each other honest.
Scale the Load, Warm Up the Pattern, and Recover for Your Next Session

Before you load the bar, warm up the motions in the exact order they will appear. Start with several minutes of easy cyclical movement to raise temperature and breathing, then move through hip hinges, bodyweight lunges, front-rack mobility and overhead reaches. Perform a few empty-bar power cleans, front-rack lunges and push presses as separate exercises. Only then connect them into a Curtis P. The complex is easier to evaluate once you know that each individual movement works comfortably.
A practical practice sequence is three slow power cleans, three paired lunges and three push presses with an empty or very light bar; then three complete Curtis P complexes at the proposed workout weight. Next, rehearse one round of three light devil presses followed by a pair of alternating Curtis P reps. It takes a few minutes but exposes equipment spacing, timing problems and technical weak spots before fatigue masks them. If the pattern already looks rushed in warm-up, the intended training load is too high.
Scale primarily by preserving movement quality and the ability to keep working. Beginners could use a lighter training bar or dumbbells, swap to bodyweight reverse lunges where the front rack is the limiting factor, and perform a simplified low-impact burpee-to-stand instead of loaded devil presses. Someone with overhead limitations may need an alternate pressing movement chosen by a qualified coach. Those are examples of possible adjustments, not guarantees that every version suits every injury or medical history.
Decide how many movements you can perform well before choosing how heavy to go. This workout has a large cumulative volume: per athlete, the ideal equal split means 50 cleans, 100 lunges and 50 push presses, plus three devil presses at the start of every minute. That is very different from an ordinary low-repetition strength workout. A bar that seems modest for a handful of cleans can feel entirely different after dozens of lunges. Train today's work capacity rather than today's theoretical one-rep maximum.
After finishing, keep moving gently until breathing and balance settle, then drink fluids and eat an ordinary recovery meal appropriate to your training goals. You do not need an elaborate recovery ritual, but you do need to respect the exercise overlap: the legs, shoulders, spinal stabilizers and grip have all worked. If you plan another demanding session the following day, consider moderating overhead volume or heavy lunges. Judge readiness using soreness, range of motion, sleep and performance rather than the urge to punish yourself again.
The most useful result may not be the finish time. A controlled final Curtis P after the devil-press interruptions tells you something about repeatable strength under fatigue. An equal partnership with clean handoffs tells you something about communication. And a workout that stays safe at the chosen loading shows that an athlete can balance ambition with judgment. Those are better long-term performance markers than staggering away with no idea how many good repetitions actually happened.

Functional-fitness shirts, tanks and workout gear for athletes who train strength, conditioning and everything in between.
EXPLORE COLLECTION




















































